Glendive, Montana
Advanced Equipment Diagnostics
When a machine has already received parts without a fix, Mondak returns to inputs and outputs: power, grounds, communication, sensor values, commands and measured hydraulic response.
Repair
Advanced Equipment Diagnostics
REPAIR WORK WE PERFORM
Electrical, control and hydraulic fault isolation
- Controller and network communication
- Voltage-drop and load testing
- Sensor and actuator circuits
- Live data and fault history
- Hydraulic pressure and flow
- Intermittent fault isolation
COMMON PROBLEMS & SYMPTOMS
Patterns that point beyond a simple component failure
- Fault returns after parts replacement
- Machine shuts down intermittently
- Controller will not communicate
- Function is commanded but does not move
- Sensor reading does not match condition
- Electrical and hydraulic symptoms overlap
WHAT WE CHECK & HOW WE TROUBLESHOOT
Recreating the failure and measuring the commanded result
A test plan is built from the schematic and the symptom. The circuit or function is measured under the conditions that cause the failure, then the result determines the repair.
Why replaced parts may not solve the fault
A sensor code may be caused by reference voltage, wiring or mechanical conditions; a commanded hydraulic function may fail because the controller, valve and actuator disagree.
Capturing faults on site versus extended harness access
Diagnostic work can often begin on site. Repairs needing controlled teardown or extensive harness access may be scheduled at Glendive.
MACHINES & CONTROL SYSTEMS
- Construction
- Agriculture
- Material handling
- Aerial
- Rail and specialty equipment
Brand logos and references indicate independent service familiarity only. They do not imply authorized dealer or factory affiliation.
COMMON QUESTIONS
Questions about advanced equipment diagnostics
GLENDIVE, MONTANA
Tell us what’s down.
Share the unit, location and symptoms. We’ll help determine the practical next step.
