Glendive, Montana
Boom & Scissor Lift Repair
A boom or scissor lift may stop for a hydraulic fault, an open interlock, a control signal or a drive problem. Mondak tests the complete function chain before replacing components.
Repair
Aerial Lift Repair
WHAT WE SERVICE
Work tied to the actual fault.
- Ground and platform controls
- Safety interlock diagnosis
- Drive and steer circuits
- Leveling and tilt systems
- Boom and platform hydraulics
- Electrical harness and sensor repair
COMMON NEEDS
- Platform controls do not respond
- Lift will not drive or steer
- Function stops at one position
- Machine reports tilt or interlock fault
- Boom drifts or moves slowly
- Battery or charging fault
THE MONDAK APPROACH
Diagnose first. Repair with purpose.
Inputs, interlocks, controller outputs and hydraulic response are checked in sequence so a disabled function is traced to its actual electrical or hydraulic cause.
Aerial equipment is commonly serviced at the facility or jobsite. Required inspections are kept separate from ordinary fault repair and are never implied by a repair visit.
RELEVANT EQUIPMENT & BRANDS
Brand references indicate service familiarity, not authorized dealer or factory status.
COMMON QUESTIONS
Questions about aerial lift repair
GLENDIVE, MONTANA
Tell us what’s down.
Share the unit, location and symptoms. We’ll help determine the practical next step.