Glendive, Montana
Hydraulic Adapters
Adapters connect components that don't share the same thread or sealing method, or change direction when space is tight. Mondak supplies straight, elbow, tee, reducer and conversion adapters for hydraulic systems, including conversions between JIC, NPT, ORB, ORFS, BSPP and metric standards. The right adapter matches the thread on both ends, uses the correct sealing surface, and has a pressure rating suitable for the circuit. Too many adapters stacked together can also create leak points and restrictions, so sometimes a different hose end is the better answer.
Parts
Hydraulic Adapters
WHAT WE CAN SOURCE
Start with the right details.
- Straight, 45° and 90° adapters
- Tees, crosses and reducers
- Thread standard conversion adapters
- Swivel adapters
- Port adapters for ORB, BSPP and metric ports
COMMON NEEDS
- Pump port doesn't match the hose end
- Tight clearance needs an elbow
- Stacked adapters leaking
- Converting imported component to domestic hose
- Needing a tee for a gauge or extra function
THE MONDAK APPROACH
Diagnose first. Repair with purpose.
Every adapter has two ends, and both have to be right: the thread form, the sealing surface and the pressure rating. We identify what's on the component and what's on the hose, confirm how each side seals, and check physical clearance for elbows and tees. Where a stack of adapters has grown over the years, we'll often suggest a single correct adapter or a different hose end — fewer joints, fewer leaks.
Adapters are matched at the Glendive counter. Bring the component or old adapter when possible.
RELEVANT EQUIPMENT & BRANDS
Brand references indicate service familiarity, not authorized dealer or factory status.
COMMON QUESTIONS
Questions about hydraulic adapters
GLENDIVE, MONTANA
Tell us what’s down.
Share the unit, location and symptoms. We’ll help determine the practical next step.
