Glendive, Montana
Metric & International Hydraulic Fittings
Imported machines, European trucks and many compact and material-handling units use fitting standards that don't match common American JIC and NPT fittings. Mondak helps identify and source DIN (light and heavy series), BSPP, BSPT, JIS, VOSS, ORFS and other metric connections. Getting it right means matching both the thread and the sealing method — a cone seat, O-ring, bonded washer or flat face. A fitting that threads on but seals on the wrong surface will leak. Bring the fitting, the port it goes into, or a clear photo with measurements, and we'll work through identification with you.
Parts
Metric & International Fittings
WHAT WE CAN SOURCE
Start with the right details.
- DIN 24° cone fittings, light and heavy series
- BSPP and BSPT British pipe fittings
- JIS fittings for Japanese equipment
- VOSS push-in and metric air/hydraulic connections
- ORFS face-seal fittings
- Thread pitch and seat angle identification
COMMON NEEDS
- Fitting threads on but leaks at the seat
- Unknown fitting on an imported machine
- BSPP vs BSPT confusion
- Metric fitting that looks like JIC
- Obsolete or hard-to-find fitting
THE MONDAK APPROACH
Diagnose first. Repair with purpose.
We measure thread diameter and pitch with gauges, check the seat angle and sealing method, and confirm the series where it matters. Photos help, but the actual fitting or a measurement is best.
Identification works best at the counter with the fitting in hand. If the machine is down in the field, send photos and measurements to start.
RELEVANT EQUIPMENT & BRANDS
Brand references indicate service familiarity, not authorized dealer or factory status.
COMMON QUESTIONS
Questions about metric & international fittings
GLENDIVE, MONTANA
Tell us what’s down.
Share the unit, location and symptoms. We’ll help determine the practical next step.