Glendive, Montana
Hydraulic Hose & Fittings
A hydraulic hose assembly has to match three things: the pressure and temperature of the circuit, the fittings at each end, and the way the hose is routed on the machine. Mondak builds hose assemblies at the Glendive counter and supplies fittings for trucks, wet kits, loaders, excavators, forklifts and ag equipment. Bring in the old hose and we'll identify the hose size, pressure rating and end fittings, then build a replacement to the right length and orientation. If the old hose failed from rubbing or heat, we can also suggest guards, sleeves or clamps so the new one lasts longer.
Parts
Hydraulic Hose & Fittings
WHAT WE CAN SOURCE
Start with the right details.
- Custom hose assemblies built at the counter
- Hose ID by size, spiral/braid construction and pressure rating
- Crimp fittings, swivels and field-attachable ends
- Fitting orientation and assembly length matching
- Abrasion sleeves, spiral guards and clamps
- Shop and mobile support for hose failures
COMMON NEEDS
- Old hose with worn-off or unreadable markings
- Replacement hose too short once the function moves
- Hose rubbed through at the same spot again
- Fitting ends that don't match what's on the shelf
- Assembly needed today to get a machine running
THE MONDAK APPROACH
Diagnose first. Repair with purpose.
The old hose is the best reference. We cut and measure, check the end fittings, confirm the pressure rating needed for the circuit and match angles on elbow ends. When a hose failed early, we look at why before building an identical one.
Most assemblies are built at the Glendive counter. When the machine can't come in, mobile hose repair can build and install on site.
RELEVANT EQUIPMENT & BRANDS
Brand references indicate service familiarity, not authorized dealer or factory status.
COMMON QUESTIONS
Questions about hydraulic hose & fittings
GLENDIVE, MONTANA
Tell us what’s down.
Share the unit, location and symptoms. We’ll help determine the practical next step.